| Potassium chloride USP/Ph.Eur/BP PARENTEX 500GM | |||
| P1240SG500 | 42483B207LW | ||
| USP/Ph.Eur/BP PARENTEX | 42483B2 | ||
| 7447-40-7 | 101786 | ||
| KCl | December 2023 | ||
| 74.56 | November 2026 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance | White, crystalline powder. Stable in air. Its solutions are neutral to litmus. | Colorless, elongated, prismatic, or cubical crystals or white, granular or crystalline powder. Stable in air. Its solutions are neutral to litmus. |
| 2 | Solubility | Complies | Freely soluble in water, and even more soluble in boiling water; practically insoluble in anhydrous ethanol. |
| 3 | Identification (Chloride a) | Complies | A white curdled precipitate which dissolves easily in ammonia should form. |
| 4 | Identification (Chloride b) | Complies | The paper should turn violet-red. |
| 5 | Identification (Potassium a) | Complies | A white crystalline precipitate should form. |
| 6 | Identification (Potassium b) | Complies | A yellow or orange-yellow precipitate should form immediately. |
| 7 | Identification (Potassium) | Complies | A white crystalline precipitate that soluble in 6N ammonium hydroxide and solutions of alkali hydroxides and carbonates should form. |
| 8 | Appearance of solution | Complies | Clear and colorless solution. |
| 9 | Acidity & alkalinity (1) | Complies | Not more than 0.5ml of 0.01M hydrochloric acid or of 0.01M sodium hydroxide should require to change the color of indicator. |
| 10 | Acidity & alkalinity (2) | Complies | A pink color should produce. |
| 11 | Bromides | Less than 0.1% | NMT 0.1% |
| 12 | Iodide(I) (1) | Complies | The substance should not show blue color. |
| 13 | Iodide(I) (2) | Less than 0.005% | NMT 0.005%. |
| 14 | Sulfates | Less than 300ppm | NMT 300ppm |
| 15 | Barium(Ba) | Complies | Any opalescence in the solution should not be more intense than reference solution. |
| 16 | Iron (Fe) | Less than 20ppm | NMT 20ppm |
| 17 | Magnesium and alkaline earth metals | Less than 200ppm | NMT 200ppm (as Ca) |
| 18 | Calcium(Ca)&Magnesium(Mg) | Complies | No turbidity should produce within 5 min. |
| 19 | Loss on drying,105°C | 0.2% | NMT 1.0% |
| 20 | Assay (on dried basis) | 99.8% | 99.0% to 100.5% |
| 21 | Sodium (Na) (1) | Complies | Sample solution tested on a platinum wire does not impart a pronounced yellow color to a nonluminous flame. |
| 22 | Total aerobic microbial count | Less than 100 CFU/gm | NMT 100 CFU/gm |
| 23 | Total Yeast and mold count | Less than 10 CFU/gm | NMT 10 CFU/gm |
| 24 | Bacterial endotoxin test | Less than 2.5 EU/gm | NMT 2.5 EU/gm |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION AS WELL AS USP, Ph.Eur, BP,SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
