| Isopropyl alcohol USP/Ph.Eur/BP 200LT | |||
| M1390LL200 | 320777314FT | ||
| USP/Ph.Eur/BP | 3207773 | ||
| 67-63-0 | 71896 | ||
| CH3CH(OH)CH3 | June 2020 | ||
| 60.1 | May 2023 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance/Description | Transparent, clear, colorless, mobile, volatile liquid, having a characteristic odor. Is flammable. Clear, colourless liquid. | Transparent, clear, colorless, mobile, volatile liquid, having a characteristic odor. Is flammable .Clear, colourless liquid. |
| 2 | Solubility | Passes | Miscible with water, with alcohol, with ether & with chloroform and with ethanol (96%). |
| 3 | Identification (Relative density, 20°C) | 0.785 | 0.785 to 0.789 |
| 4 | Identification (By Refractive index, 20±0.5°C) | 1.377 | 1.376 to 1.378 |
| 5 | Identification (By IR) | Complies | IR spectra of the sample should be concomitant with IR spectra of the corresponding standard. |
| 6 | Identification (By chemical test) | Complies | The entire sulfuric acid layer should turn violet. |
| 7 | Identification (By GC Chromatogram) | Complies | The retention time of the major peak of sample solution corresponds to reference 2-propanol standard. |
| 8 | Specific gravity, 25°C | 0.783 | Between 0.783-0.787. |
| 9 | Assay (By GC) | 99.92% | Not less than 99.0%. |
| 10 | UV absorbance profile (10mm cell) at 230nm | 0.126 | 0.30 max. |
| 11 | UV absorbance profile (10mm cell) at 250nm | 0.034 | 0.10 max. |
| 12 | UV absorbance profile (10mm cell) at 270nm | 0.010 | 0.03 max. |
| 13 | UV absorbance profile (10mm cell) at 290nm | 0.006 | 0.02 max. |
| 14 | UV absorbance profile (10mm cell) at 310nm | 0.006 | 0.01 max. |
| 15 | Absorbance (Between 230 nm - 310 nm) | Complies | The spectrum shows a steadily descending curve with no observable peaks or shoulders. |
| 16 | Benzene and related substances, (Benzene) | Not detected | 2ppm max. |
| 17 | Benzene and related substances, (Total impurity apart from 2-butanol) | 0.09% | 0.3% max. |
| 18 | Acidity or Alkalinity | 0.4 mL of 0.01 M sodium hydroxide | Not more than 0.6 mL of 0.01 M sodium hydroxide should require to change the colour of the indicator to pale pink. |
| 19 | Peroxides | Complies | No colour developes. |
| 20 | Non-volatile substances | 5.3ppm | 20ppm max. |
| 21 | Water (By KF) | 0.048% | 0.5% max. |
| 22 | Limit of volatile impurities (Each individual impurity) | 0.08% | Not more than 0.1%. |
| 23 | Limit of volatile impurities (Total impurity) | 0.08% | Not more than 1.0%. |
| 24 | Appearance of solution | Passes | The sample should be clear and colorless. Solution of 1 mL sample in 20 mL of water should be clear. |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF USP, PH.EUR AND BP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
