| Sodium chloride IP/BP PARENTEX PLUS 500GM | |||
| I2570SG500 | 40436B729CW | ||
| IP/BP PARENTEX PLUS | 40436B7 | ||
| 7647-14-5 | 93721 | ||
| NaCl | March 2023 | ||
| 58.44 | February 2026 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance/Description | White crystalline powder | White crystalline powder or colourless crystals or white or almost white pearls |
| 2 | Solubility | Complies | Freely soluble in water, and slightly more soluble in boiling water; practically insoluble in anhydrous ethanol |
| 3 | Identification (Chloride A) | Complies | A curdy white precipitate, insoluble in nitric acid but soluble in dilute ammonia should form |
| 4 | Identification (Chloride B) | Complies | A filter paper moistened with diphenylcarbazide solution should turn violet-red |
| 5 | Identification (Sodium A) | Complies | A dense white precipitate should form |
| 6 | Identification (Sodium B) | Complies | No precipitate should form |
| 7 | Appearance of solution | Complies | Clear and colourless solution |
| 8 | Acidity & alkalinity | Complies | Not more than 0.5ml of 0.01M hydrochloric acid or 0.01M sodium hydroxide should require to change the colour of the indicator. |
| 9 | Bromide (Br) | Less than 100ppm | 100ppm max |
| 10 | Ferrocyanide[Fe(CN6)] | Complies | No blue colour should produce within 10 minutes. |
| 11 | Iodide(I) | Complies | The mixture shows no blue colour within 5 min. |
| 12 | Nitrite (NO2) | 0.004 | The absorbance should not be greater than 0.01 at 354 nm |
| 13 | Phosphate (PO4) | Less than 25ppm | NMT 25ppm |
| 14 | Sulphate (SO4) | Less than 200ppm | NMT 200ppm |
| 15 | Arsenic (As) | Less than 1ppm | NMT 1ppm |
| 16 | Barium(Ba) | Complies | Any opalescence in the solution should not more intense than that of reference solution after 2 hrs |
| 17 | Iron (Fe) | Less than 2ppm | NMT 2ppm |
| 18 | Magnesium and alkaline earth metals | Less than 100ppm | NMT 100ppm (Calculated as Ca) |
| 19 | Calcium(Ca)&Magnesium(Mg) | Less than 50ppm | NMT 50ppm (Calculated as Ca) |
| 20 | Loss on drying (105°C, 3 Hrs) | 0.3% | NMT 0.5% |
| 21 | Assay (Dried substance) | 99.8% | 99.0% - 100.50% |
| 22 | Heavy metal | Less than 5ppm | NMT 5ppm |
| 23 | Potassium (K) | 190ppm | NMT 500ppm |
| 24 | Aluminum | Not detected | NMT 0.2 ppm |
| 25 | Total aerobic microbial count | Less than 100 CFU/gm | NMT 100 CFU/gm |
| 26 | Total Yeast and mold count | Less than 10 CFU/gm | NMT 10 CFU/gm |
| 27 | Escherichia coli | Absent/gm | should be Absent /gm |
| 28 | Pseud. aeruginosa | Absent/gm | should be Absent /gm |
| 29 | Staphylococcus aureus | Absent/gm | should be Absent /gm |
| 30 | Bile-tolerant gram negative bacteria | Absent/gm | should be Absent /gm |
| 31 | Clostridia | Absent/gm | should be Absent /gm |
| 32 | Salmonella | Absent/ 10gm | should be Absent / 10gm |
| 33 | Bacterial endotoxin test | Less than 5.0 IU/gm | NMT 5.0 IU/gm |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION AS WELL AS IP, BP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
