| Methanol BP 1LT | |||
| 96930LC100 | 205540419LP | ||
| BP | 2055404 | ||
| 67-56-1 | 33331 | ||
| CH3OH | December 2016 | ||
| 32.04 | November 2019 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance | Clear colourless volatile hygroscopic liquid. | Clear, colourless, volatile, hygroscopic liquid. |
| 2 | Solubility | Passes | Miscible with water and with methylene chloride. |
| 3 | Boiling point | 64°C | About 64°C |
| 4 | Identification A (By Refractive index, 20±0.5°C) | 1.328 | 1.328 to 1.330 |
| 5 | Identification B (By IR) | Complies | To comply the test |
| 6 | Acidity or alkalinity | NIL | Not more than 0.9ml of 0.01M sodium hydroxide is required to change the colour of the indicator to pink. |
| 7 | Relative density (20°C) | 0.791 | 0.791 to 0.793 |
| 8 | UV absorbance profile (10mm cell) at 230nm | 0.106 | 0.15 max |
| 9 | UV absorbance profile (10mm cell) at 250nm | 0.020 | 0.05 max |
| 10 | UV absorbance profile (10mm cell) at 270nm | 0.007 | 0.02 max |
| 11 | UV absorbance profile (10mm cell) at 290nm | 0.002 | 0.01 max |
| 12 | Impurity A (Benzene) | Not detected | 2ppm v/v max |
| 13 | Related substances (Any impurity) | NMT 0.1% | 0.1% max |
| 14 | Related substances (Total impurity) | NMT 0.3% | 0.3% max |
| 15 | Reducing substances | Complies | The pink colour is not completely dischared within 5 min. |
| 16 | Residue on evaporation | 4ppm | 10ppm max |
| 17 | Water | 0.028% | 0.1% max |
| 18 | Residual solvent (ICH) | Complies | To comply the test |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF BP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
