| diSodium hydrogen phosphate anhydrous BP 500GM | |||
| 96610SG500 | 199480424JP | ||
| BP | 1994804 | ||
| 7558-79-4 | 32094 | ||
| Na2HPO4 | October 2016 | ||
| 141.96 | September 2019 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance | A white powder hygroscopic . | A white or almost white powder, hygroscopic |
| 2 | Solubility | Passes | Soluble in water, practically insoluble in ethanol (96%). |
| 3 | Identification A (By Chemical test) | Complies | Solution S is silghtly alkaline. |
| 4 | Identification B (By Loss on drying) | 0.31% | Not more than 1.0% |
| 5 | Identification C (By Chemical test) | Complies | Solution S gives reaction (b) of phosphates |
| 6 | Identification D (By Chemical test) | Complies | Solution S gives reaction (a) of sodium |
| 7 | Appearance of solution | Complies | Solution S is clear and colourless. |
| 8 | Reducing substances | Complies | To comply the test. |
| 9 | Monosodium Phosphate | NMT 2.5% | 2.5% max, ratio should be not greater than 0.025. |
| 10 | Chlorides | NMT 200 ppm | 200ppm max |
| 11 | Sulphate (SO4) | NMT 500 ppm | 500ppm max |
| 12 | Arsenic (As) | NMT 2 ppm | 2ppm max |
| 13 | Iron(Fe) | Not detected | 20ppm max |
| 14 | Heavy metals | NMT 10 ppm | 10ppm max |
| 15 | Loss on drying,130°C | 0.31% | Not more than 1.0% |
| 16 | Assay (Dried substance) | 99.70% | 98.0% - 101.0% |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF BP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
