| Isopropyl alcohol BP 2.5LT | |||
| 96390LC250 | 194550409IP | ||
| BP | 1945504 | ||
| 67-63-0 | 31126 | ||
| CH3CH(OH)CH3 | September 2016 | ||
| 60.1 | August 2019 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance | Clear colourless liquid. | Clear, Colourless liquid. |
| 2 | Solubility | Passes | Miscible with water and with alcohol. |
| 3 | Identification A (Relative density, 20°C) | 0.786 | 0.785 to 0.789 |
| 4 | Identification B (Refractive index, 20±0.5°C) | 1.377 | 1.376 to 1.379 |
| 5 | Identification C (By Chemical test) | Complies | To Comply the test |
| 6 | Appearance of Solution | Complies | Clear, colourless liquid. |
| 7 | Acidity or Alkalinity | Complies | To Comply the test |
| 8 | UV absorbance profile (10mm cell) at 230nm | 0.109 | 0.30 max |
| 9 | UV absorbance profile (10mm cell) at 250nm | 0.024 | 0.10 max |
| 10 | UV absorbance profile (10mm cell) at 270nm | 0.009 | 0.03 max |
| 11 | UV absorbance profile (10mm cell) at 290nm | 0.007 | 0.02 max |
| 12 | UV absorbance profile (10mm cell) at 310nm | 0.005 | 0.01 max |
| 13 | Benzene and related substances, (Benzene) | Not detected | 2ppm max |
| 14 | Benzene and related substances, (Total impurity apart from 2-butanol) | 0.049% | 0.3% max |
| 15 | Peroxides | Complies | To Comply the test |
| 16 | Non-volatile substances | 5 ppm | 20ppm max |
| 17 | Water | 0.063% | 0.5% max |
| 18 | Residual solvent (ICH) | Complies | To comply the test |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF BP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
