| Citric Acid IP CS2 5KG | |||
| 92489SR500 | 40487A401DW | ||
| IP Customer specific 2 | 40487A4 | ||
| 77-92-9 | 93719 | ||
| C6H8O7 | April 2023 | ||
| 192.13 | March 2026 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Description | White powder; slightly hygroscopic in moist air. | Colourless crystals or a white powder; slightly hygroscopic in moist air. |
| 2 | Solubility | Complies | Very soluble in water, freely soluble in ethanol (95%), sparingly soluble in ether.. |
| 3 | Identification A (By IR) | Complies | IR spectra of the sample should be concomittant with IR spectra of the satandard. |
| 4 | Identification B (By Chemical test) | Complies | A white precipitate soluble in 6M acetic acid should produce. |
| 5 | Identification C (By Chemical test) | Complies | A 10.0% w/v solution should be strongly acidic. |
| 6 | Appearance of Solution | Complies | The solution should be clear and not more intensely coloured than reference solution YS7, BYS7 or GY7. |
| 7 | Arsenic (As) | Less than 1ppm | 1ppm max. |
| 8 | Barium(Ba) | Complies | Any opalescence produced shall not more intense than that of mixture of 5ml of solution A and 5ml of distilled water. |
| 9 | Calcium (Ca) | Less than 200ppm | 200ppm max. |
| 10 | Heavy metals | Less than 10ppm | 10ppm max. |
| 11 | Iron (Fe) | Less than 50ppm | 50ppm max. |
| 12 | Chlorides | Less than 50ppm | 50ppm max. |
| 13 | Sulphate (SO4) | Less than 150ppm | 150ppm max. |
| 14 | Oxalic acid | Complies | Any pink colour produced should not be more intense than that produced by carrying out the test using 0.2mg of oxalic acid dissolved in 4ml of water. |
| 15 | Readily carbonizable substances | Complies | Any colour produced shall not be more intense than that of a mixture of 1.0 ml of CCS and 9.0 ml of FCS. |
| 16 | Sulphated ash | 0.05% | Not more than 0.1%. |
| 17 | Water | 0.03% | Not more than 1.0%. |
| 18 | Assay (Anhydrous basis) | 99.7% | Not less than 99.0% and Not more than 101.0%. |
| 19 | Particle size | 65.8% passes through #40 mesh | NLT 50% material should pass through #40 mesh. |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION AS WELL AS IP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
