| Lactic acid USP/Ph.Eur 2.5LT | |||
| 91808LC250 | 399917130AW | ||
| USP/Ph.Eur | 3999171 | ||
| 79-33-4 | 92047 | ||
| C3H6O3 | January 2023 | ||
| 90.1 | December 2025 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance/Description | Colorless, syrupy liquid not more intensely colored than reference solution Y6. | Colorless or slightly yellow, syrupy liquid and not more intensely colored than reference solution Y6. |
| 2 | Solubility | Complies | Insoluble in chloroform;Miscible with water, Alcohol and with ethanol 96% |
| 3 | Identification (By chemical test) | Complies | The solution should be strongly acidic. |
| 4 | Identification (by Relative density, 20°C) | 1.21 | 1.20-1.21 |
| 5 | Identification (Lactate) | Complies | A blue color should produce. |
| 6 | Appearance of solution | Complies | The solution should not be more intensely colored than reference solution Y6. |
| 7 | Assay | 89.8% | 88.0% - 92.0% w/w |
| 8 | (S)-enantiomer | 98.04% | NLT 95.0% |
| 9 | Sulphated ash / Residue on ignition | 0.004% | NMT 0.05% |
| 10 | Sugars and other reducing substances | Complies | No red or greenish precipitate should form. |
| 11 | Calcium (Ca) | Less than 200ppm | NMT 200ppm |
| 12 | Sulphate (SO4) | Less than 200ppm | NMT 200ppm |
| 13 | Sulphate(SO4) | Complies | No turbidity should produce. |
| 14 | Ether insoluble substances | Complies | The solution should not more opalescent than the solvent used for the test. |
| 15 | Citric, oxalic and phosphoric acids | Complies | Any opalescence produced in the sample solution should not be more intense than that of reference solution. |
| 16 | Limit of citric, oxalic, phosphoric or tartaric acid | Complies | No turbidity should produce. |
| 17 | Chloride (Cl) | Complies | No opalescence should produce. |
| 18 | Readily carbonizable substances | Complies | No dark color should develop at the interface of the two acid within 15 min. |
| 19 | Sugars | Complies | No red precipitate should form. |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF USP AND PH.EUR SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
