| Isopropyl alcohol CDMF 200LT | |||
| 84390LL200 | 41020D207FW | ||
| CDMF | 41020D2 | ||
| 67-63-0 | 95148 | ||
| CH3CH(OH)CH3 | June 2023 | ||
| 60.1 | May 2026 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Description | Transparent, colourless, mobile, volatile liquid, having a characteristic odour and a slightly bitter taste. Is flammable. Clear, colourless liquid. | Transparent, colourless, mobile, volatile liquid, having a characteristic odour and a slightly bitter taste. Is flammable. Clear, colourless liquid |
| 2 | Solubility | Complies | Miscible with water, with alcohol, with methanol, with ether & with chloroform. |
| 3 | Relative density, 20°C | 0.786 | 0.785 to 0.788 |
| 4 | Refractive index (20°C ± 0.5°C) | 1.377 | 1.376 to 1.378 |
| 5 | Identification by IR | Complies | IR spectra of the sample should be concomitant with IR spectra of the corresponding standard. |
| 6 | Identification (By GC Chromatogram) | Complies | The retention time of the major peak of sample solution corresponds to the 2-propanol peak of the system suitability standard solution, as obtained in the assay. |
| 7 | Specific gravity, 25°C | 0.784 | Between 0.783-0.787 |
| 8 | Identification (Limit of Methanol) | Not detected | NMT 0.02% |
| 9 | Assay (GC) | 99.9% | Not less than 99.0% |
| 10 | UV absorbance profile (10mm cell) @ 230nm | 0.144 | NMT 0.30 |
| 11 | UV absorbance profile (10mm cell)@250nm | 0.049 | NMT 0.10 |
| 12 | UV absorbance profile (10mm cell)@270nm | 0.010 | NMT 0.03 |
| 13 | UV absorbance profile (10mm cell)@290nm | 0.004 | NMT 0.02 |
| 14 | UV absorbance profile (10mm cell) @ 310nm | 0.000 | NMT 0.01 |
| 15 | Absorbance (Between 230 nm - 310 nm) | Complies | The spectrum shows a steadily descending curve with no observable peaks or shoulders |
| 16 | Benzene and related substances, (Benzene) | Not detected | NMT 2 ppm |
| 17 | Benzene and related substances, (Total impurity apart from 2-butanol) | 0.04% | NMT 0.3% |
| 18 | Limit of Volatile Impurities (Methanol) | Not detected | NMT 0.02% |
| 19 | Limit of Volatile impurities (Individual Known impurity ethyl ether) | Not detected | NMT 0.1% |
| 20 | Limit of Volatile impurities (Individual Known impurity acetone) | 0.001% | NMT 0.1% |
| 21 | Limit of Volatile impurities (Individual Known impurity diisopropyl ether) | Not detected | NMT 0.1% |
| 22 | Limit of Volatile impurities (Individual Known impurity 1-propanol) | 0.003% | NMT 0.1% |
| 23 | Limit of Volatile impurities (Individual Known impurity 2-butanol) | Not detected | NMT 0.1% |
| 24 | Limit of Volatile impurities (Individual unspecified impurity) | 0.03% | NMT 0.1% |
| 25 | Limit of Volatile Impurities (Total impurities) | 0.05% | NMT 1.0% |
| 26 | Acidity | Complies | Not more than 1.4ml of 0.01 mol/L sodium hydroxide VS is required. |
| 27 | Peroxides | Complies | No colour develops |
| 28 | Non-volatile matter | 0.0008% | NMT 0.002% |
| 29 | Water (By KF) | 0.05% | NMT 0.2% |
| 30 | Clarity and colour of solution | Complies | The solution should be clear and colorless. |
| 31 | Water insoluble substances | Complies | The solution should maintain clear. |
| 32 | Readily oxidizable substances | Complies | The pink colour of the solution should not disappear completely. |
| 33 | Readily carbonizable substances | Complies | Any colour produced should not more intense than that of the reference solution Y1. |
| 34 | Carbonyl compounds | Complies | The dark red colour produce should not more intense than that of 0.50ml of the reference solution obtained in the same way. |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION AS WELL AS USP, Ph.Eur, CP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
