| Dibasic sodium phosphate anhydrous CPH8 5KG | |||
| 83610SR500 | 386869219IV | ||
| Customised pharma grade 8 | 3868692 | ||
| 7558-79-4 | 89536 | ||
| Na2HPO4 | September 2022 | ||
| 141.96 | August 2025 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance/Description | White powder that readily absorbs moisture | White powder that readily absorbs moisture and free from visible extraneous matter |
| 2 | Solubility | Complies | Freely soluble in water; insoluble in alcohol |
| 3 | Identification (By chemical test) | Complies | Solution should slightly alkaline |
| 4 | Identification (By Loss on drying) | 0.4% | NMT 1.0% |
| 5 | Identification (Sodium) | Complies | A dense precipitate should form |
| 6 | Identification (Phosphate 1) | Complies | With silver nitrate solution neutral solution should yield yellow precipitate that soluble in 2N nitric acid and 6 N ammonium hydroxide |
| 7 | Identification (Phosphate 2) | Complies | With ammonium molybdate solution, acidified solutions should yield a yellow precipitate that should soluble in 6N ammonium hydroxide |
| 8 | Identification (Phosphate 3) | Complies | A yellow colour should develop |
| 9 | Assay (on dry basis) | 99.6% | 98.0% - 100.5% |
| 10 | Assay (on dried basis) | 99.6% | 98.0% - 101.0% |
| 11 | Monosodium Phosphate | Less than 2.5% | NMT 2.5% |
| 12 | Water insoluble substances | 0.002% | NMT 0.05% |
| 13 | Appearance of solution | Complies | Solution should be clear and colourless |
| 14 | Chlorides | Less than 0.001% | NMT 0.001% |
| 15 | Sulfate | Less than 0.01% | NMT 0.01% |
| 16 | Arsenic | Less than 2 ppm | NMT 2ppm |
| 17 | Reducing substances | Complies | The solution should remain purplish red colour |
| 18 | Iron(Fe) | Not detected | NMT 0.002% |
| 19 | Loss on drying at 130°C | 0.4% | NMT 1.0% |
| 20 | Alkalinity | 9.15 | 9.0-9.4 |
| 21 | Carbonate | Complies | No effervescence should produce |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION AS WELL AS USP, Ph.Eur, Ch.P SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
