| Sodium chloride CPH8 5KG | |||
| 82570SR500 | 372399216CV | ||
| Customised pharma grade 8 | 3723992 | ||
| 7647-14-5 | 89537 | ||
| NaCl | March 2022 | ||
| 58.44 | February 2025 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance/Description | White crystalline powder, Has a saline taste. | Colorless, cubic crystals or white crystals or crystalline powder. Has a saline taste.Free from visible extraneous matter |
| 2 | Solubility | Complies | Freely soluble in water; and slightly more soluble in boiling water; soluble in glycerin; slightly soluble in alcohol. Practically insoluble in anhydrous ethanol |
| 3 | Identification(Sodium) | Complies | Dense white precipitate should form. |
| 4 | Identification (Chloride) | Complies | The precipitate dissolves easily with the possible exception of a few large particles, which dissolve more slowly |
| 5 | Appearance of solution | Complies | Clear and colorless solution |
| 6 | Identification (Chemical test 1) | Complies | A filter paper moistened with diphenylcarbazide solution should turn violet-red |
| 7 | Identification (Chemical test 2) | Passes | No precipitate should form |
| 8 | Assay (Dried basis) | 99.8% | 99.0% -100.5% |
| 9 | Arsenic | Less than 1 ppm | NMT 1 ppm |
| 10 | Barium(Ba) | Complies | Any opalescence in the test solution should not more intense than that in the reference solution |
| 11 | Ferrocyanide[Fe(CN6)] | Complies | No blue color should develop in 10 min. |
| 12 | Iodide(I) | Complies | No blue color should observe in the mixture |
| 13 | Iron (Fe) | Not detected | NMT 2ppm |
| 14 | Bromide (Br) | Less than 100ppm | NMT 100ppm |
| 15 | Phosphate (PO4) | Less than 25ppm | NMT 25ppm |
| 16 | Magnesium and alkaline earth metals | Less than 100ppm | NMT 100 ppm, calculated as Ca |
| 17 | Nitrites | 0.003 | Absorbance should not be more than 0.01 at 354 nm |
| 18 | Sulphate | Less than 200ppm | NMT 200ppm |
| 19 | Acidity & alkalinity | Complies | NMT 0.5ml of 0.01N hydrochloric acid or 0.01N sodium hydroxide should require to change the color of this solution |
| 20 | Loss on drying,105°C | 0.2% | NMT 0.5% |
| 21 | Calcium | Complies | No opalescence should produce within 5 minutes. |
| 22 | Potassium (K) | Not detected | NMT 0.02% |
| 23 | Calcium & Magnesium | 20 ppm | NMT 50 ppm, calculated as Ca |
| 24 | Magnesium (Mg) | Not detected | NMT 0.001% |
| 25 | Aluminium (Al) | Not detected | NMT 0.2 ppm |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION AS WELL AS USP, Ph.Eur, IP, Ch.P SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
