| Potassium chloride IP 5KG | |||
| 51240SR500 | 416210620HW | ||
| IP | 4162106 | ||
| 7447-40-7 | 97217 | ||
| KCl | August 2023 | ||
| 74.56 | July 2026 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Description | White crystalline powder; odorless. | Colorless crystals or a white, crystalline powder;odorless. |
| 2 | Solubility | Complies | Freely soluble in water; practically insoluble in ethanol and in ether. |
| 3 | Identification (Potassium A) | Complies | A yellow or orange yellow precipitate should produce immediately |
| 4 | Identification (Potassium B) | Complies | A white, crystalline precipitate should produce |
| 5 | Identification (Potassium C) | Complies | A yellow crystalline precipitate should produce which on ignition leaves a reside of potassium chloride and platinum |
| 6 | Identification (Chloride A) | Complies | A curdy white precipitate which should insoluble in nitric acid but soluble in ammonia solution should form |
| 7 | Identification (Chloride B) | Complies | A filter-paper moistened with diphenyl carbazide solution should turn violet red. |
| 8 | Appearance of solution | Complies | Clear and colorless solution. |
| 9 | Acidity & alkalinity | Complies | Not more than 0.5ml of 0.01M hydrochloric acid or of 0.01M sodium hydroxide for neutralization to bromothymol blue solution. |
| 10 | Arsenic (As) | Less than 1ppm | NMT 1ppm |
| 11 | Barium(Ba) | Complies | Should not be more opalescent than reference solution. |
| 12 | Heavy metals | Less than 10ppm | NMT 10ppm |
| 13 | Calcium(Ca)&Magnesium(Mg) | Complies | The solution remains clear. |
| 14 | Iron (Fe) | Less than 20ppm | NMT 20ppm |
| 15 | Bromide (Br) | Less than 0.1% | NMT 0.1% |
| 16 | Iodide(I) | Complies | The substance shows no blue colour after 5 minutes. |
| 17 | Sulphate (SO4) | Less than 300ppm | NMT 300ppm |
| 18 | Loss on drying,105°C | 0.3% | Not more than 1.0% |
| 19 | Assay (on dried basis) | 99.8% | 99.00% - 100.50% |
Remarks: THE CAPTIONED MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF IP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
