| Sodium carbonate anhydrous CPH4-A 5KG | |||
| 16560SR500 | 155436506JO | ||
| Customised pharma grade 4- A | 1554365 | ||
| 497-19-8 | 23790 | ||
| Na2CO3 | October 2015 | ||
| 105.99 | September 2018 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance | Almost white slightly granular hygroscopic. | A white or colourless or almost white, slightly granular or fine powder, hygroscopic.(USP/Ph.Eur) |
| 2 | Solubility | Passes | Freely soluble in water, more soluble in boiling water, practically insoluble in ethanol (96%) (USP/Ph.Eur) |
| 3 | Identification A (By Chemical test) | Passes | The solution should be strongly alkaline.(Ph.eur) |
| 4 | Identification B (By Chemical test) | Passes | Gives reaction of carbonate. (Ph.Eur) |
| 5 | Identification C (By Chemical test) | Passes | Gives reaction (a) of sodium. (Ph.Eur) |
| 6 | Identification D (By Loss on drying) | 0.09% | 1.0% w/w max (Ph.Eur) |
| 7 | Identification A | Passes | Gives positive test for sodium (USP) |
| 8 | Identification B | Passes | Gives positive test for carbonate (USP) |
| 9 | Appearance of solution | Passes | The solution should be clear and not more intensely coloured than reference solution Y6. (Ph.Eur) |
| 10 | Alkali hydroxides and bicarbonates | Passes | The solution does not become red with berium chloride solution and phenolphthalein solution. Boil the remainder of the filtrate for 2 minutes. The solution remaints clear. (Ph.eur) |
| 11 | Chloride (Cl) | NMT 125 ppm | Not more than 125ppm (Ph.Eur) |
| 12 | Sulphate(SO4) | NMT 250 ppm | Not more than 250ppm (Ph.Eur) |
| 13 | Arsenic (As) | NMT 5 ppm | Not more than 5ppm (Ph.Eur) |
| 14 | Iron (Fe) | NMT 50 ppm | Not more than 50ppm (Ph.Eur) |
| 15 | Heavy metals | NMTr 10 ppm | Not more than 10ppm (USP/Ph.Eur) |
| 16 | Loss on drying | 0.09% | 1.0% w/w (Ph.Eur) |
| 17 | Water | 0.09% | 0.5% max (USP) |
| 18 | Assay (Dried substance) | 99.94% | 99.50% to 100.50% (USP/Ph.Eur) |
| 19 | Particle size | Passes | 100% of the material should be pass through 40# |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
