| Potassium Dihydrogen Phosphate CPH8 5KG | |||
| 14270SR500 | 391229206KV | ||
| Customised pharma grade 8 | 3912292 | ||
| 7778-77-0 | 89601 | ||
| KH2PO4 | November 2022 | ||
| 136.09 | October 2025 | ||
| Sr.No. | Test | Result | Specification |
|---|---|---|---|
| 1 | Appearance/Description | White, crystalline powder. The PH of the solution (1 in 100) is 4.5 | Colorless or white crystals , granular or crystalline powder. The PH of the solution (1 in 100) is about 4.5 |
| 2 | Solubility | Complies | Freely soluble in water, practically insoluble in ethanol (96%) and alcohol |
| 3 | Identification (By chemical test) | Complies | Solution should faintly acid |
| 4 | Identification (Phosphate 1) | Complies | A yellow color should develops |
| 5 | Identification (Phosphate 2) | Complies | With silver nitrate solution neutral solution should yield yellow precipitate that soluble in 2N nitric acid and 6 N ammonium hydroxide |
| 6 | Identification (Phosphate 3) | Complies | With ammonium molybdate solution, acidified solutions should yield a yellow precipitate that should soluble in 6N ammonium hydroxide |
| 7 | Identification (Potassium A) | Complies | A yellow or orange-yellow precipitate should formed immediately |
| 8 | Identification (Potassium B) | Complies | White crystalline precipitate should form |
| 9 | pH | 4.32 | 4.2 to 4.5 |
| 10 | Appearance of solution | Complies | Clear and colourless solution |
| 11 | Reducing substances | Complies | The colour of the permanganate should not be completely discharge |
| 12 | Chlorides | Less than 200 ppm | 200 ppm max |
| 13 | Sulfates | Less than 300 ppm | 300 ppm max |
| 14 | Iron | Less than 10 ppm | 10 ppm max |
| 15 | Arsenic | Less than 2 ppm | 2 ppm max |
| 16 | Lead | 0.8 µg/g | 5 µg/g max |
| 17 | Fluoride(F) | Less than 10 µg/g | 10 µg/g max |
| 18 | Insoluble Substances | 0.1% | 0.2% max |
| 19 | Loss on drying | 0.2% | 1.0 % max |
| 20 | Assay (on dried basis) | 99.7% | 98.0% to 100.5% |
Remarks: THE CAPTIONED BATCH MATERIAL COMPLIES WITH THE PRESCRIBED QUALITY OF THE ABOVE SPECIFICATION AS WELL AS USP-NF, Ph.Eur,BP SPECIFICATION.
FINAR provides this analytical report in good faith and to the best of its knowledge. It should not be substituted for the users own raw material quality control.
| Tested By (Chemist - Quality Control) | Approved By (Head - Quality Control) |
Computer Generated Report - Does not require Signature.
